Soundtube FP6020-II User Manual download pdf

Assembly

& Installation

Instructions

8005 W. 110th St., Suite 208 Overland Park, KS 66210

www.mseaudio.com | 913.663.5600 | www.soundtube.com

Install Instructions For:

SS30 speakers

913.663.5600 | 855.663.5600 | www.soundtube.com

Box contents

1 Speaker Housing

2 Rubber Washers

1 Steel Washer

1 Black Steel Coupling w/ Brass Reducer

1 Parabolic Reector

2 Wire Nuts

Assembly

The recommended method of assembling the speaker is to rst

slip one black rubber washer onto the threaded nipple at the top

of the speaker stem. Next, insert the threaded nipple and speaker

wire through the hole in the parabolic reector, and slip the

remaining rubber and steel washers onto the end of the nipple

protruding through the parabola. Now thread brass reducer and

coupling onto the nipple and hand tighten them rmly. The speak-

er can now be handled as a unit.

Wiring Connections

The Secret Sound speaker operated in the same manner as any

conventional speaker. It will work with any amplied sound

source, and can be connected to the sound source using either

16 or 18 gauge standard speaker wire.

(Speaker wire not included)

Ceiling-Mounted Rigid Conduit

(Not Included)

Speaker Wire From Sound Source

(Not Included)

Coupling With Brass Reducer

Black Steel Washer

Rubber Washer

Hole In Center Of Parabola

Parabola

Rubber Washer

Threaded Nipple

Speaker

Installation

The Secret Sound installation is similar to that of a ceiling-mount-

ed electrical map. The black steel coupling has ½” inside threads

which can be attached to standard rigid electrical conduit with ½”

outside threads. This conduit is generally mounted directly to the

ceiling using a standard electrical junction box. Once you have

mounted your rigid conduit from the ceiling, bring the speaker

wired from the sound source through the conduit so approxi-

mately two inches of wire are protruding from the threaded

bottom end. Before connecting the speaker, position it on a

steady ladder or scaffold near the end of the ceiling mounted

conduit. Now connect the wire ends from the coupling to the

ends of your wire coming from the sound source. Once the wires

are connected, “pre-rotate” the speaker 6 or 8 times count-

er-clockwise. This will prevent the speaker wire connection from

becoming too twisted when threaded onto the coupling. Thread

the coupling onto the end of the conduit and hand tightened

rmly. The speaker is now ready to operate. The speaker can be

mounted at any height off the oor with minimal affect on the

diameter or quality of the bean of focused sound. The parabolic

reection can be painted without affecting the speaker perfor-

mance, although it is recommended that the underside be paint-

ed with a gloss nish to insure optimum sound reection.

Completed Assembly

Ceiling-Mounted

Conduit

Speaker Wire from

Sound Source

Speaker Wire

From Speaker

Coupling

Parabola

Connection Details

Wire Nuts

1 2

Summary of Contents

Page 1 - Instructions

Assembly & InstallationInstructions8005 W. 110th St., Suite 208 Overland Park, KS 66210www.mseaudio.com | 913.663.5600 | www.soundtube.comInstall

Page 2 - Repacking Instructions

Install Instructions For: SS30 speakers913.663.5600 | 855.663.5600 | www.soundtube.comWarranty and Return Policy Trouble ShootingIf after installation

Soundtube FP6020-II User Manual

Browse online or download User Manual for Acoustics Soundtube FP6020-II. Soundtube FP6020-II User Manual

Summary of Contents

More documents for Acoustics Soundtube FP6020-II

Comments to this Manuals

Soundtube FP6020-II User Manual

Browse online or download User Manual for Acoustics Soundtube FP6020-II. Soundtube FP6020-II User Manual

Summary of Contents

More documents for Acoustics Soundtube FP6020-II

Comments to this Manuals

Related products and manuals for Acoustics Soundtube FP6020-II